Minutia Bump here
Thursday, July 30, 2009
Monday, July 6, 2009
Modified clutch bellcrank. The welded stud the clutch rod used to be hooked to is ground off. This is the end to get the a rod end. Use a 3/8" bore-3/8"x 24 right hand thread economy female rod end. An economy, General Purpose, rod end is about $ 10.00 and will withstand over 5000 pounds load.
Here's the pictures of the bellcrank to throwout fork rod showing the 3/8" rod end on the bellcrank end and the stock AMC adjuster barrel on the other end of a 3/8" mild steel rod threaded 3/8"x 24 on both ends. A header tube is at the bottom of the picture